manualshive.com logo in svg

Rockwell Automation 1769-L23-QBFC1B, Руководство по установке

Поделиться
Скачать
Rockwell Automation 1769-L23-QBFC1B Скачать руководство пользователя страница 36

36

     CompactLogix Packaged Controllers

Publication 1769-IN082A-EN-P - July 2008

Select the Packaged Controller’s Operating Mode

Use the keyswitch on the front panel of the packaged controller to select the 
packaged controller’s operating mode.

This table explains the three modes (keyswitch positions) available on the front 
panel of the packaged controller.

Operating Mode Selection

Use this 
operating 
mode

To achieve these tasks

RUN

•

Upload projects.

•

Run the program and enable outputs.

Note: When the keyswitch is in the RUN position, you cannot change the operating mode 
by using the Controller Status menu in RSLogix 5000 software.

PROG

•

Disable outputs.

•

Upload/download projects.

•

Create, modify, and delete tasks, programs, or routines.

•

Stop the execution (scanning) of tasks. That is, the packaged controller does not 
execute (or scan) tasks while the keyswitch is in the Prog position.

Note: When the keyswitch is in the PROG position, you cannot change the operating 
mode by using the Controller Status menu in RSLogix 5000 software.

REM

•

Upload/download projects.

•

Switch between Remote Program, Remote Test, and Remote Run modes by using 
the Controller Status menu in RSLogix 5000 programming software.

–

These Remote modes are can be selected using the Controller Status menu:

Remote Run

 - In this mode, the controller executes (scans) tasks, enables 

outputs, and enables online edits.

Remote Program

 - In this mode, the controller: disables outputs, allows 

program and task edits while online, downloads projects, and inhibits execution 
(scanning) of tasks.

Remote Test

 - In this mode, the controller executes tasks with outputs disabled 

and enables online editing.

Содержание 1769-L23-QBFC1B





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды