RVDG7M
26
RADIO ANTENNA
Radio antenna receptacle.
GPS ANTENNA
Refer to
Installation Guide (pg.22)
for GPS
antenna instructions.
IPOD
iPod input connector (Cable included).
VIDEO/AUDIO INPUT
VIDEO OUTPUT
AUDIO OUTPUT
SUBWOOFER OUTPUT
Auxiliary input for game console, video camera, etc.
GROUND
Connect to vehicle chassis.
CAMERA SIGNAL
OUTPUT
Connect to the plus side (+) of car battery.
VIDEO OUT 2
Connect to the minus side (-) of car battery.
CAN BUS TXD
Connect to the rear right speaker.
CAN BUS RXD
Connect to the rear left speaker.
SW KEY 1
SW KEY 2
Connect to steering wheel. Refer to
Wheel (pg.21)
for programming instructions.
*PARKING
Connect to the parking brake signal lead.
ILLUMINATION
Connect to vehicle illumination cable.
ACC
Connect to 12V possitive accessory turn on.
POWER B+
Connect to the plus side (+) of car battery.
GROUND B-
Connect to the minus side (-) of car battery.
AMP REMOTE TURN ON
Connect to amplifier remote turn on.
AUTO ANTENNA
Connect to power antenna up and down.
*BACK
Connect to the plus side (+) of the back lamp signal
lead.
SPEAKER REAR R
Connect to the rear right speaker.
SPEAKER REAR L
Connect to the rear left speaker.
SPEAKER FRONT R
Connect to the front right speaker.
SPEAKER FRONT L
Connect to the front left speaker.
*BACK: Connection for the Rear Vision Camera
• Be sure to connect the reverse gear lead to the vehicle’s relevant terminal.
• Connect the Rear Vision Camera to the RCA pin cable; if not, the screen
turns black while the gearshift lever is in the reverse gear position.
*PARKING: Connecting the parking brake lead
• Connect the lead to parking brake lamp ground in the meter panel.
• Connecting the parking brake lead to lamp ground allows you to watch video
images
• When the parking brake is engaged.
• When the parking brake lead is not connected, the monitor will not display
video images.
