Rockville RPG152K, Руководство пользователя

Страница: 7 / 16

MASTER LEVEL
MASTER LEVEL
LINE/USB LEVEL
You can choose to hook up two microphones to your Power Gig in the following manner.
Set up microphone #1 as instructed above. Using same set up instructions, insert
microphone #2 into the ultra-low noise Line input which features its own separate Level
control. Use this Level control to increase the microphone level and balance the inputs
between the two microphones before attempting to adjust the Master Level.
Multi-Microphone Hook Up
You can use the Line Input function when you wish to hook up an additional stereo signal
source without the use of a mixer console. CD players, DVD music players, MP3 players
etc can be plugged directly in to the RCA inputs labeled LINE INPUT.
To connect a CD, DVD music player or MP3 player.
1. Turn your Power Gig unit to OFF position.
2. Turn Master Level to 0 position.
3. Turn Level control to 0 position.
4. Connect the music source unit to the RCA inputs marked Line Input.
5. Switch ON your Power Gig unit.
6. Slowly turn the Level control clockwise until the CLIP LED indicator begins
to blink, then turn it down slightly. This indicates the maximum input voltage gain is
matched and set properly.
7. Turn Master Level up to achieve proper volume.
Line Input Feature
OFF
1 2 3
5 6
4
7
LINE INPUT
LINE INPUT
LINE/USB LEVEL
LINE/USB LEVEL MASTER LEVEL
POWER
CLIP
ON
POWER
POWER