Rockville RPG152K, Руководство пользователя

Страница: 14 / 16

UNIT FAILS TO POWER UP.
1. Make sure unit is plugged in properly to wall outlet.
2. Check that power cable is plugged in tightly to unit.
3. If people or equipment tend to step and roll over or stretch your power cable it can
get damaged. Always try a second cable to test for shorts in original cable. Dispose of
original damaged power cables immediately.
4. If system still fails to light, UNPLUG FROM WALL. There is a small door below the
plug input on the Power Gig unit, pop off this door and remove the fuse with a needle
nose pliers and replace with same rated fuse. Please make sure unit is unplugged from
wall before attempting to change the fuse!
UNIT TURNS ON, BUT NO SOUND.
1. Check that Volume is turned up.
2. Be sure your microphone is turned on.
3. All appropriate cables should be plugged in correctly.
5. Be sure Level of appropriate channels are set above 0 and matched correctly
as indicated above.
Fuse replacement Diagram
Trouble Shooting
OLD FUSE
SPARE FUSE