11
Responsible party name: Rockville
Address: 600 Bayview Ave.
Entrance A
Inwood, NY 11096
Hereby declares that the product(s) RPA70WBT V2 Professional Mixing Karaoke Amplifier with AM/FM Digital Tuner complies with FCC rules as
mentioned in the following paragraph:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following mea-
sures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
PROBLEM
SOLUTION
No USB
playback
1. Make sure you’ve selected the proper source.
2. Make sure that the USB drive and the audio files are properly formatted (MP3 or WAV).
3. Make sure the drive capacity does not exceed 64Gb.
3. Make sure that USB drive is properly plugged in.
4. Check USB drive for damage.
Buzzing sound
Be sure you are using the correct type of cable. Check the requirements of the connected gear for appropriate cable types.
