You can use the Line Input function when you wish to hook up an additional stereo signal
source: Mixers, Keyboards, CD players, DVD music players, MP3 players etc. can be
plugged directly in to the RCA jacks labeled LINE INPUT.
To connect a mixer, keyboard, CD, DVD music player or MP3 player.
1. Make sure the RAM BT unit’s power switches are in the OFF position.
2. Turn Master Volume to 0 position.
3. Turn Line/MP3 Volume control to 0 position.
4. Connect the music source unit to the RCA jacks marked Line In.
5. Use the push button (located next to RCA jacks) to select between Line input
or MP3 input.
6. Switch ON your Power Gig unit.
7. Slowly turn the Line/MP3 Volume control clockwise until you hear audible distortion,
then turn it down slightly. This indicates the maximum input voltage gain is
matched and set properly.
8. Turn Master Volume up to achieve proper volume.
Line Input Feature
OFF
1
POWER
2
3
6
7
5
8
4
ON
POWER