Your RAM BT features two ultra-low noise Mic/Line inputs via XLR & 1/4 inch
TRS stereo jacks.
1. Make sure the RAM BT unit power switch is in OFF position.
2. Plug in your microphone.
3. Keep Master Volume at Min position.
4. Turn Mic Volume to Min position.
5. Switch on the RAM BT unit.
6. Slowly turn Mic Volume clockwise until you achieve appropriate volume setting. Proper
function is achieved when you hear audible distortion. The above adjustment matched the
microphone preamp to the input volume of the RAM BT unit.
7. Now turn up the Master Volume to necessary volume by rotating clockwise.
Always stand behind the RAM BT unit when making your microphone adjustments to
avoid feedback distortion.
Set up microphone #1 as instructed above. Using same set up instructions, insert micro-
phone #2 into ultra-low noise 1/4in TRS input which features its own separate Volume
control. Use this Volume control to increase the microphone level and balance the inputs
between the two microphones before attempting to adjust the Master Volume.
Multi-Microphone Hook Up
4
2
3
7
1
5
6
OFF
ON
POWER
POWER
Microphone Presentations