Do not allow fog fluid to become contaminated. Always replace cap after use.
There are no user serviceable parts in this unit. Any work on internal parts should be
carried out by a qualified technician. Removal of any covers is considered a breach of
warranty.
If you experience low output, pump noise or no output at all, unplug immediately. Check
fluid level, check the hose attached to the tank and make sure there are no obstruc-
tions and fluid is flowing through the hose, check the external fuse, remote connection,
and main power supply. Ensure that tank is filled and all other components are working
properly. If all appear to be OK, plug the unit in again. If the unit still does not operate
properly and you are unable to determine the cause of the problem, contact Rockville for
servicing.
ATTENTION: If the unit is unable to produce fog, do not continue to push the remote
control button as this may cause permanent damage.
This unit can pose a burn danger if not used properly. Do not obstruct the nozzle.
Fog output is very hot, avoid coming within 24˝ of the nozzle during operation. Output
nozzle becomes very hot during operation (572° F).Keep flammable materials at least
20˝ away from the nozzle. Always allow the fog machine to cool down before cleaning
or servicing.
Never use any other type of liquid other than Rockville water based fog fluid or any
other comparable brand. Never drink fog liquid. If its ingested, call a doctor immedi-
ately. If fog fluid comes into contact with skin or eyes, rinse thoroughly with water.
Beware of condensation around the nozzle. Consider carefully when mounting. All fog
machines may splutter small amounts of fog occasionally during operation and for a
minute or so after being turned off.
3. Run unit in a well ventilated area until tank is empty.
4. Replace nozzle.
5. Cleaning is now complete. Unplug and wait until it is cool before refilling with Rockville
fog fluid or any other water based fog fluid.
6. To clean the exterior, wipe with a dry cloth.
7. Always store the unit dry (no fluid in the tank).
All fog machines are prone to clogging due to the consistency of fluids and the high
temperatures at which they vaporize. However, a well maintained machine should provide
years of reliable use.
Maintenance/Servicing
Troubleshooting
Caution
