Rockville Power Gig RPG122K, Руководство пользователя

Страница: 8 / 16

3. Keep Volume at 0 position.
4. Turn Mic Level to 0 position.
5. Switch on the Power Gig unit.
6. Slowly turn Mic Level clockwise until you achieve appropriate volume setting. This
is determined by the CLIP LED indicator light. Proper function is achieved when the
CLIP indicator lights up at peak levels, it should never be in constant on position.
7. The above adjustment matched the microphone preamp to the input volume of the
Power Gig unit.
8. Now turn up the Volume to necessary loudness by rotating clockwise.
Always stand behind the Power Gig when making your microphone adjustments to avoid
feedback distortion.
You can choose to hook up two microphones to your Power Gig in the following manner.
Set up microphone #1 as instructed above. Using same set up instructions, insert mi-
crophone #2 into the ultra-low noise Mic 2 input which features its own separate Level
control. Use this Level control to increase the microphone level and balance the inputs
between the two microphones before attempting to adjust the Volume.
Multi-Microphone Hook Up
4
PWR
3
8
1
5
6 6
CLIP
OFF
ON
POWER
POWER
MIC2 LEVEL VOLUME
VOLUME
VOLUME
10 10
10
10
0 0
0
0
1 1
1
1
2 2
2
2
3 3
3
3
4 4
4
4
6 6
6
6
5 5
5
5
7 7
7
7
8 8
8
8
9
MIC1 LEVEL
MIC1 LEVEL
10
10
0
0
1
1
2
2
3
3
4
4
6
6
5
5
7
7
8
8
9
9
9
9
9
MIC 2
MIC INPUT
*
NEVER USE BOTH
INPUTS AT ONCE.
OR*
2