Rockville Go Party X10, Руководство пользователя

Страница: 9 / 12

6 7
Troubleshooting
PROBLEM
No sound/
distorted sound
No power
Poor Mic sound
Mic/Guitar
feedback
Buzzing sound
1. Make sure the unit is plugged in and the power switch is in the
ON position.
2. Check that the power cable is plugged in tightly to the unit.
3. If using the battery, make sure the battery is charged and that
the power switch is in the battery operation position (see page 5
for details.)
1. Make sure the microphones are on, that you are using the appro-
priate cable, and that the volume settings are turned up.
2. Check wireless mic batteries.
Point the mics and/or guitar away from the speaker. Make sure
they are behind the speaker.
Make sure you are using a proper cable. For ¼˝ cables, there are
3 types: instrument, TS (unbalanced), and TRS (balanced). Check
the requirements of the connected gear and the input of the
speaker and make sure you are using the appropriate cable.
1. Check that all input cables are plugged in correctly.
2. Check the Master Volume settings.
3. Be sure volume of the input source is set properly.
4. If using mics or guitar, make sure the corresponding volume
control is set properly.
5. Be sure your microphone (wireless or wired) or guitar is on.
7. If volume and EQ settings are maxed out, turn one of them
down as you may be overdriving the unit.
SOLUTION
No SD or USB
playback 1. Make sure you've selected the proper source.
2. Make sure that the audio files are in the specified format.
3. Make sure the drive are not larger than the acceptable capaci-
ty rating and that it is properly formated (see page 5 for details.)
Bluetooth/TWS
pairing fails 1. Check to see that both devices are turned on and that your
Bluetooth device is discoverable.
2. Turn both devices off and then on.
3. Make sure you've selected the proper source.
4. Make sure that the Bluetooth device is within 5 feet of the unit.
5. Move both devices away from other Bluetooth devices, micro-
waves, wireless routers, and other electronics.
6. Make sure that the unit is not paired to a previously paired
device or to another speaker.
Please refer to pages 3 and 4 for TWS and Bluetooth pairing
procedures.