Rockville Go Party X10, Руководство пользователя

Страница: 7 / 12

4 5
AUX
Battery Operation and Charging
The 3.5mm AUX jack allows for input from smart phones, MP3 players, CD players, or
any other external signal source with a 3.5mm jack or RCA outputs. Please note you will
need either a 3.5mm to 3.5mm cable or an RCA to 3.5mm cable (not included).
1. Make sure the speaker is OFF.
2. Set the master VOLUME to the lowest setting.
3. Connect signal source to the 3.5mm AUX input.
4. Turn the speaker ON.
5. Set the master VOLUME to the desired level.
Please note, inserting a USB drive or SD card will override AUX input.
To use the internal battery, firstly ensure that the battery is fully charged (see the charging
procedure below.) Press the speaker’s power button to the right for battery operation.
To charge the battery:
1. Turn the speaker off.
2. Plug in the external power supply.
3. Battery will begin to charge automatically and the LED indicator (in the LCD display)
will be orange.
4. Once the battery is fully charged, LED indicator will be green.
Please note: Charging time is 6 hours. The battery will last 15 hours at 25% volume, 9
hours at 50%, and 5 hours at 90%. The speaker features a charging protection circuit to
prevent the battery from overcharging.
USB/SD
The built-in media player allows you to play MP3 files. To access this function follow the
steps below.
1. Make sure the speaker is ON.
2. Insert a USB flash drive or SD card into the corresponding port. Music should begin
playing automatically.
3. Use the PLAY/PAUSE button to pause and resume playback.
4. Use the PREVIOUS/NEXT buttons for track selection.
5. Use the master VOLUME knob to set the volume level.
Please note, the unit can accept SD cards and USB drives with a max capacity of 32GB.
USB drive must be formatted as FAT32 and files must be in the MP3 format.