Rocktron MIDI XChange, Инструкция по эксплуатации

Страница: 18 / 28

UP, DOWN and RECALL Switches
These switches will allow you to change presets or MIDI channels.
The range is 1-128 for the presets and 1-16 for the MIDI Channels.
For details on changing the MIDI channel see section titled
SETTING MIDI CHANNEL for more details on this function.
UP Switch - Depressing and releasing this switch once will
increase the preset number by one. Depressing and holding the
switch down will engage the automatic increment feature of the
MIDI XChange. The MIDI XChange will now begin scrolling up
through the preset numbers. After 4 increments the increment
speed will increase allowing faster preset navigation.
DOWN Switch - Depressing and releasing this switch once will
decrease the preset number by one. Depressing and holding the
switch down will engage the automatic decrement feature of the
MIDI XChange. The MIDI XChange will now begin scrolling
down through the preset numbers. After 4 decrements the decre-
ment speed will increase allowing faster preset navigation.
RECALL Switch - This switch is used to “select” the preset or
MIDI Channel. This switch is also used to toggle between the last
two presets selected.
Once you have used the UP or DOWN switches to reach your
desired preset you must then depress and release the RECALL
switch to select the preset. In this example we have scrolled up
from preset 1 to preset 35 (which is now flashing - see diagram
following page):