Rocktron HUSH 2X, Инструкция по эксплуатации

Страница: 8 / 20

Descriptions continued.........
6
7
8
9
10
CHANNEL 2 - THRESHOLD Control determines
the minimum input level at which the HUSH filter
and downward expander will begin to operate.
Setting this control too high will result in a loss of
sustain, as notes will tend to die out much faster
than they should. Conversely, when set too low, the
expander will close too late (if at all) and the noise
floor will remain audible
CHANNEL 2 - SWITCH - This switch allows for the
HUSH to be bypassed when noise reduction is not
required.
CHANNEL 2 - ON/OFF Led - When lit, the LED
indicates that the HUSH is currently active in the
signal path.
CHANNEL 2 - INPUT Jack - Using a standard 1/4”
guitar cable, plug into this jack AFTER any noisy
pedal/effect or from an “effects send”.
CHANNEL 2 - OUTPUT Jack - Using a standard
1/4” guitar cable you can plug in another pedal from
this jack or plug directly into your amplifier or to the
“effects return.”