Rocktron ALL ACCESS, Руководство пользователя

Страница: 65 / 77

62
CUSTOM
CUSTOM allows the user to create a custom MIDI string of any five MIDI
commands for each preset. All five commands will be sent whenever the preset is
recalled.
CUSTOM, Page 1 of 2 - Command Selection
The first page of the CUSTOM program, Command Selection , allows for the
selection of MIDI commands and the order in which they are to be transmitted once
the preset has been recalled.
To access CUSTOM:
( Π) To access CUSTOM, press the "2ND" button to activate the secondary
button functions.
(  ) Press the "CUSTOM" button. The L.E.D. above the "CUSTOM" button will flash
and the All Access™ will display the first page of the CUSTOM program.
To create a MIDI command string:
( Ž ) Use the "INC" and "DEC" switches directly below the preset number
currently displayed to select the desired preset.
(  ) Use the "INC" and "DEC" switches directly below the command number
currently displayed to select the desired command number.
(  ) Use the "INC" and "DEC" switches directly below the MIDI command
currently displayed to select the desired MIDI command ( see CUSTOM,
page 2 ).
MIDI Message Abbreviations:
NOFF> (Note Off)
N ON> (Note On)
KPRS> (Key Pressure)
C CH> (Control Change)
P CH> (Program Change)
CPRS> (Channel Pressure)
PBEN> (Pitch Bend)
T CLK (Timing Clock)
START (Start)
CONTU (Continue)
STOP (Stop)
ACTSN (Active Sensing)
SYSRS (System Reset)
M T C > (MIDI Time Code)
SGPP> (Song Position Pointer)
SGSL> (Song Select)
T REQ (Tune Request)
NONE (None)
Note:
MIDI commands which are
followed by a ">" symbol
require additional information
on the next CUSTOM page
before the message will be
stored in this page (see
CUSTOM, Page 2).
G