Please read carefully before proceeding
Always follow the basic precautions listed below to avoid the possibility of serious injury or even
death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions
include, but are not limited to, the following:
Power supply / power cord (devices with power cords/power supplies
)
:
• Only use the voltage specified as correct for the device. The required voltage is printed on the type plate of the device. Check the
power cable from time to time regarding dirt, damage or other influence.
• Use only the included power cord / power supply or adaptor. Do not place the power chord near heat sources such as heaters or
radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in
a position where anyone could walk on, trip over, or roll anything over it.
• Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms.
When removing the electric plug from the device or an outlet, always hold the plug itself and not
the cord. Pulling by the cord can damage it.
• To avoid generating unwanted noise, make sure there is adequate distance (50 cm or more) between the AC power adaptor and the
device. Do not cover or wrap the AC power adaptor with a cloth or blanket.
Location:
• When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is
still flowing to the product all the minimum level. When you are not using the product
for a long time, make sure to unplug the power cord from the wall AC outlet.
• Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire.
• Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
• Do not place the device in an unstable position where it might accidentally fall over.
• Do not block the vents. This device has ventilation holes at the bottom/rear to prevent the internal temperature
from becoming too high. In particular, do not place the device on its side or upside down. Inadequate ventilation
can result in overheating, possibly causing damage to the device(s), or even fire.
• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.
Doing so may result in noise, both in the device itself and in the TV or radio next to it.
Connections and handling:
• Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off
for all devices, set all volume levels to minimum. • Do not use the device or headphones for a long period of time at
a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss
or ringing in the ears, consult a physician.
• Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the buttons,
switches or connectors
Do not open:
• Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-
servicable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified service
personnel.
Water warning:
• Do not expose the instrument to rain, use it near water or in damp or wet conditions on it containing liquids which might spill into any
openings. Never insert or remove an electric plug with wet hands.
If you notice any abnormality:
• If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the device, or if any unusual
smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet,
and have the device inspected by qualified service personnel.
Noise:
• Listening to loud music for longer periods
may lead to hearing damage
First steps:
connect your electric guitar with amplifier
(INPUT-jack)
by using the
guitar cord. With
GAIN
control you can adjust the level of distortion.
CRUNCH
and
LEAD
switches select different modes of distortion indicated by green/red
LEDs. Sound examples see in chart below. Use
BASS, MID and TREBLE
controls to adjust tone. Set overall volume by using the
VOLUME
control. Input
jacks
CD-IN
to be connected with CD or MP3-Player.
AUX-IN
to be connected
with additional audio signal sources.
Turn
VOLUME
control to
„0“
before switching on the amplifier. Turn on power
and adjust volume to comfortable level.
CLEAN/CRUNCH/LEAD sound examples:
WEEE declaration
Your product is designed and manufactured with materials and components of high quality, which are recyclable and can be reused. The symbol means that your
product should be disposed of separately from household waste when it reaches its end of life. Please dispose of this equipment at your local collection point or
recycling center. Please help to protect the environment in which we all live.
All specifications and appearances are subject to change without notice. All information was correct at time of printing. Musikhaus Kirstein GmbH does not
guarantee for the accuracy or completeness of any description, photograph or statement contained in this manual. Printed colors and specifications may vary
slightly from product. Products from Musikhaus Kirstein GmbH are only sold through authorized dealer. Distributors and dealers are not agents of Musikhaus
Kirstein GmbH and have no authority to bind Musikhaus Kirstein GmbH legally in any way. This manual is protected by copyright. Any copying or reprint, even in
excerpts, is only allowed with written consent of Musikhaus Kirstein GmbH. The same applies to reproduction or copying of images, even in altered form
Musikhaus Kirstein GmbH
Bernbeurener Strasse 11
86959 Schongau / Germany
Phone 0049-8861-909494-0 / Fax 0049-909494-19
GAIN
CLEAN
LEAD
SOUND
3
Clean (no distortion)
6
Smooth Crunch (low distortion)
5
x
Crunch
8
x
Overdrive
5
x
x
Lead Guitar
8
x
x
Super Lead Guitar (Metal)
Rocktile Scream15 Guitar Amplifier
00029625
Version 01/2014
