Rocks OK-03.4300, Руководство пользователя, Страница: 8 / 36

9
8
Do not expose power tools to rain or wet conditions.
Use only a working charger cable. the cable cannot be cut.
Do not use tools while you are tired or under the influence of stimulants. Use personal protective
equipment, in particular: safety glasses, hearing protection and protective gloves. When working in
dusty conditions, use additional respiratory protection masks.
Avoid accidental starting. Make sure the switch is in the off position before connecting to the battery.
When changing accessories in the tool, turn off the device and disconnect the battery.
Do not rush. Maintain proper posture and balance at all times. This allows better control of the tool in
unexpected situations. Use protective clothing. Do not wear loose clothing or jewelry.
Principles of work with AQ-ONE tools
• Use only accessories that are suitable for the size of the holder.
• Never use damaged accessories
• Check the operation of the tool with no load for 30 seconds. If there are vibrations or malfunctions
during this time, switch off immediately.
• Keep the air vents around the engine clean
• The tools are intended for use in a dry environment. Never work on wet ground or in rain.
• Make sure that the power supply complies with the requirements of the tool. Never use the tool
with an improper power supply.
• Always use knowledge and common sense when working with tools, especially in unusual working
conditions. First of all, take care of your own work safety and the safety of outsiders.
ATTENTION! Despite the inherently safe construction, the use of safety measures and additional
protective measures, there is always a residual risk of injury during work.
CONSTRUCTION & TECHNICAL DATA
1. Driver ½”
2. Direction switch
3. Handle
4. Ventilation holes
5. Clutch control panel
and AUTO BREAK function
6. Main switch
7. LED lamp
8. Battery clamping button
9. Battery charge indicator