APPLICATION:
Removal and replacement of brake fluid from most types of vehicle brake
systems; venting.
SAfeTy TIPS
Caution:
Always follow safety precautions when working with this device to avoid personal
injury and damage to the device.
Note:
the device should be operated by qualified and trained persons who are familiar with
this manual and the vehicle manual.
1.
Wear approved goggles and gloves.
2.
Keep your balance, do not walk over running machines.
3.
Keep tools in good condition. Periodically check cables and hoses.
If damaged, replace. The handle must always be clean and dry.
4.
Pay attention and use common sense. Do not operate equipment when you are tired.
5.
Do not use a tool with damaged parts. Before work, check that the device will work
safely. Check the alignment of the moving parts.
Any damaged parts should be repaired by a qualified person.
6.
Use only original spare parts and accessories.
7.
Do not operate the device under the influence of alcohol or drugs.
8.
Ensure regular maintenance of the appliance by a qualified technician.
9.
Only fill the device with brake fluid.
10.
Dispose of the used fluid in accordance with the regulations,
do not re-use the used fluid.
Note:
the operating parameters may vary due to pressure variations and compressor capacity.
working presure
0,69-2,76 BAR (10 - 40PSI)
Air connection
¼”
Tank capacity
5 l
Gauge range
0-10 BAR (0-140PSI)
Cable length
3 m
Sizes
Ø
28/21/46 cm
Tank capacity
1,2 l
weight
8,9 kg