Rockler Material Mate, Инструкция по эксплуатации

Страница: 7 / 8

7
1. Holding the material securely, release the Locking
Casters (27)
.
2. With one hand on the material and one hand on the cart,
carefully push the cart to its destination, paying close
attention to the terrain in front of the cart.
Fig. 11.
Unloading Material
1. Make sure the cart is on a flat, level surface. The cart could
move or tip or the load could become unstable if unloaded on
uneven terrain.
> Take special care and go slowly when moving
across uneven surfaces such as a door threshold;
material could shift or become unstable
during transport.
CAUTION
Lifting the Sheet Upright
1. Position yourself on the side of the sheet opposite the
Flip Stops (24 and 25).
2. Holding the sheet securely, reach underneath and release the
Latch Arm (26).
Flip Stops (24 and 25) must be rotated up
and secured by tightening the 4-Star Knobs (10) before the
sheet can be safely tilted upright. Load will fall when tilted
unless Flip Stops (24 and 25) are engaged. Fig. 9.
Keep hands clear of the pivot point to avoid
pinching fingers.
3. With sheet positioned against the Flip Stops (24 and 25)
slowly allow the sheet to tip upright, maintaining a secure
hold until the sheet stops moving and you’re sure the load
is stable on the cart. Fig. 10.
Transporting the Sheet
Fig. 11
Fig. 9
Fig. 8
Fig. 10
Bullet Pin
8
25
24
23