7
3.
Press three indexing dog pins tightly into the overlapping
holes to perfectly position and secure the template in place.
Fig. 4.
The template should not move when the indexing
dog pins are installed correctly.
4.
Follow the process you used to rout holes along the edges
of the worktop, making several passes of increasing depth
and vacuuming out the holes between passes until you cut
all the way through.
5.
Once you’ve routed all holes at that template location, shift
the template and secure with three indexing dog pins to rout
the next set of holes. Proceed in this manner until you’ve
routed all the holes you want.
Check Rockler.com for updates. If you have further questions, please
contact our Technical Support Department at 1-800-260-9663
Fig. 4
Indexing dog pin
Route holes
outline in red
