6
Connecting to Your Device
1. Charge the speaker by plugging the small
end of the included USB cord into the
control unit and the other end into
a power source.
2. Once the battery is charged, disconnect
the speaker. Make sure
Bluetooth
®
connectivity is enabled on your device.
3. Turn on the speaker by pressing and
holding the
button on the back of the
control unit for three seconds. The blue
LED will blink.
4. When you open your device, “My BT
Speaker” should appear onscreen.
Select it and wait for the connection to
be established. Once a connection is
established, the blue LED will blink
quickly and you will hear a tone.
Operating Controls
On/off: Press and hold the
button on the
back of the control unit.
Play/Pause: Press and release
to pause
or play.
Forward/back: To advance to the next audio
file, press and release the
button. To
go back to the previous audio file, press and
release the
button.
Volume up/down: The speaker volume can
be controlled at the speaker or through the app
that you are using to play audio. To increase
volume at the speaker, press and hold the
button. To decrease volume, press
and hold the
button.
Auxiliary Input Jack: Allows you to connect a
device via cable. Accepts a 3.5mm plug.
The LED indicator
light will be red while the battery is
charging and go off when the battery
is fully charged. Battery life is up to
four hours.
Wireless Speaker Controls
Check Rockler.com for updates. If you have further
questions, please contact our Technical Support
Department at 1-800-260-9663 or
Auxiliary Input Jack
Micro USB
Charging
Input
LED Indicator
Press and RELEASE:
Play or Pause
Press and HOLD:
Power on/off
Press and RELEASE:
Next audio file
Press and HOLD:
Increase volume
Press and RELEASE:
Previous audio file
Press and HOLD:
Decrease volume
