2
> For any tool used in conjunction with this product,
always read, understand and follow the instructions
and safety warnings for that tool.
> Before using this product, review and verify that all
tools to be used with it have safety equipment
installed and are in proper working order as
defined by the tools’ owner’s manuals.
> Do not use this product until you have read and
are confident you understand the:
• Product Specific Safety Warnings (below);
• Connecting the Vacuum Clamp Pods;
• Securing Vacuum Pods to T-Track;
• Securing Vacuum Pods to Another Surface;
• Using the Vacuum Clamp Pods;
• Troubleshooting.
> Remain alert and use good judgment when using
this tool. Do not use this tool if you are in any way
impaired by medications, alcohol, drugs or fatigue.
> Dress appropriately and remove all jewelry, secure
loose clothing and tie up long hair before using
this tool.
> It is the sole responsibility of the purchaser of this tool
to ensure that any third party reads and complies with
all the instructions and safety precautions outlined in
this manual prior to using the tool.
> Maintain these instructions and warnings as long as
you own the tool. Keep this booklet in a place where
it will be readily available for reference.
> The user assumes all risk for the proper use of
this tool and for ensuring product suitability for
intended application.
> Always wear safety glasses in compliance with ANSI
safety standards and hearing protection and follow all
standard shop safety practices including:
• Keep your work area well lit and clean;
• Use dust collection tools and dust face masks to
reduce exposure to dust;
• Use accessory safety equipment such as
feather boards, push sticks and push blocks
whenever
appropriate;
• Do not use power tools in explosive
environments (e.g., in the presence of flammable
liquids, fumes or dust);
• Keep children and bystanders away while operating
your
tools;
• Maintain proper footing at all times and do
not
overreach;
• Do not force the tool;
• Unplug all power tools before making any
adjustments or changing accessories.
> These warnings and instructions do not represent the
total of all information available regarding tool safety,
use and technique. Always seek out opportunities to
learn more and improve your skills and knowledge.
Drilling, sawing, sanding or machining wood
products can expose you to wood dust, a substance known ot
the State of California to cause cancer. Avoid inhaling wood dust
or use a dust mask or other safeguards for personal protection.
For more information go to www.P65Warnings.ca.gov/wood.
This tool is designed for specific applications as defined in the instructions and should not be modified and/or used
for any other applications. Before using the Vacuum Clamp Pods, read, understand and follow all instructions and
safety information provided. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY WARNINGS
> Vacuum Clamp Pods are recommended for use
only when attached to a horizontal surface. Use on
a vertical surface increases risk of dangerous
workpiece release.
> Always test the strength of the suction hold before
machining the workpiece. A weak hold could allow
the workpiece to release, potentially causing
serious injury.
> The Vacuum Clamp Pods must be attached securely
to a work surface and connected to each other and to
the vacuum pump.
> The Vacuum Clamp Pods are not for use while
making through cuts on the workpiece.
> Use the appropriate number of pods to hold and
support your workpiece.
> Avoid large overhangs to reduce risk of workpiece
tilting and breaking the vacuum seal.
> Make sure both the surface of the workpiece and the
gasket and ball valve of the Vacuum Clamp Pods
are clean and free of debris. Any buildup could
interfere with the strength of the seal and the
pods’ holding power.
> Vacuum hold will be stronger on tighter-grained woods
and less-porous materials.
> Do not expose body parts to the vacuum pressure.
PRODUCT SPECIFIC SAFETY WARNINGS
