F
-
H Series
Transport, Removal and Storage
ATTENTION
Allow all movements to stop before leaving the operator
’
s position to lubricate or clean the
machine. Before working on or underneath the shredder, place blocks on both sides of the
operating vehicle tires or treads and under each end of the shredder to prevent accidental
lowering of the machine. Remove the ignition key from the operating vehicle and allow all
movements to stop before beginning work. To transport, disengage auxiliary hydraulics
and lower the machine to a reasonable ride height.
Removal
1.
Lower the shredder all the way onto the ground.
2.
Unlock the locking devices on the operating vehicle mount.
3.
Tilt the operating vehicle mount so the bottom of the mount comes inward and lower the
mount of the vehicle so that it disconnects from the shredder.
Storage
1.
Clean the shredder thoroughly.
2.
Relax belt tension.
3.
Lubricate the shredder as recommended.
4.
Check hoses and replace if damaged.
5.
Check for worn parts and replace so you will be ready to operate when necessary.
6. Store in a clean, dry place.
www.rockhound.com 14
