SECTION 5—REPLACEMENT PARTS AND OTHER CONSIDERATIONS
Replacement Parts, Using the Shield, Maintenance, Warranty, Disclaimer, and Limitation of Liability
Using the Shield
The shield is intended to deflect objects such as chips (swarf) and splashing coolant. For protection, position the shield
between the point of operation and the operator. Make sure it will not be hit by normal movements of the machine
and its parts (machine table, chuck, rotating handles, etc.). During loading or setup of workpieces, the shield can be
moved out of the way.
Maintenance
These shields are made of polycarbonate which was selected for its strength and durability under impact. Although it
will scratch if mistreated, it can be kept clear with appropriate care.
Remove coolant, chips, or debris periodically.
Using a clean sponge or soft clean cloth, wash with mild
soap or detergent and lukewarm water.
Rinse well with clean water.
Hairline scratches or minor abrasions can be removed or
minimized using a mild car polish such as paste wax. A
wax coating also makes cleaning easier.
When many shields are used in a plant, spare shields can be kept on hand and exchanged periodically. The shields
can be removed from the machines, carefully washed, and exchanged at a later date.
Do Not rub or wipe with dirty shop towels or
scrape with a blade.
Do Not use gasoline, benzine, acetone, or
carbon tetrachloride on the shield.
Do Not use cleaners or powders that contain
abrasives or “dry rub” abrasive dust to remove
coolant, lubricant, and chips.
WARRANTY, DISCLAIMER AND LIMITATION OF LIABILITY
WARRANTY
Rockford Systems, LLC warrants that this product will be free from defects in material and workmanship for a period
of 12 months from the date of shipment thereof. ROCKFORD SYSTEMS LLC’S OBLIGATION UNDER THIS WAR-
RANTY IS EXPRESSLY AND EXCLUSIVELY LIMITED to repairing or replacing such products which are returned to
it within the warranty period with shipping charges prepaid and which will be disclosed as defective upon examina-
tion by Rockford Systems, LLC. This warranty will not apply to any product which will have been subject to misuse,
negligence, accident, restriction and use not in accordance with Rockford Systems, LLC’s instructions or which will
have been altered or repaired by persons other than the authorized agent or employees of Rockford Systems, LLC.
Rockford Systems, LLC’s warranties as to any component part is expressly limited to that of the manufacturer of the
component part.
LIMITATION OF LIABILITY
Under no circumstances, including any claim of neg-
ligence, strict liability, or otherwise, shall Rockford
Systems, LLC be liable for any incidental or consequen-
tial damages, or any loss or damage resulting from a de-
fect in the product of Rockford Systems, LLC.
DISCLAIMER
The foregoing Warranty is made in lieu of all other
warranties, expressed or implied, and of all other liabilities
and obligations on the part of Rockford Systems, LLC,
including any liability for negligence, strict liability, or oth-
erwise, and any implied warranty of merchantability or fit-
ness for a particular purpose is expressly disclaimed.
KSL-282/RSI/0
6
19
Part No.
Description
KYL-229
9" Disc Sander Shield Only (6" x 13")
KYL-231
12" Disc Sander Shield Only (7" x 16")
KYL-233
16" Disc Sander Shield Only (9" x 20")
KYL-235
20" Disc Sander Shield Only (11" x 24")
KYL-237
24" Disc Sander Shield Only (13" x 28")
FKT-083
T-Handle Knob
Disc Sander Shield Replacement Parts
Part No.
Description
KYL-227
Upper Belt Shield Only (L-Shaped)
KYL-225
Lower Belt Shield Only (6" x 8")
FKT-083
T-Handle Knob (For Upper Belt Shield)
Belt Sander Shield Replacement Parts
