4
Rockford Systems, LLC—www.rockfordsystems.com
Call: 1-800-922-7533
SECTION 2—UPPER BELT SANDER SHIELDS
Upper Belt Sander Shield Installation Instructions (continued)
10. Permanently attach danger signs No. KSC-046
and No. KSC-048 (if furnished). Make sure they
are readily visible to all personnel who work on or
around the machine.
6. Slide shield arm onto mounting arm and tighten
button-head cap screws.
7. Reattach end cap to bottom of shield arm.
8. Attach an end cap to each end of mounting arm us-
ing the furnished nylon push-in fasteners.
9. Use the T-handle knob to adjust the shield up or
down.
5. Using the mounting arm as a template, mark, drill,
and tap mounting holes and attach the mounting
arm to the machine using the furnished socket-
head cap screws.
Mounting Arm
Shield Arm
Mounting Arm
