Rockford Fosgate Yamaha YXZ RFYXZ-K8, Набор для установки, Страница: 7 / 12

7
Installation
Step 5 - Amplifier Mounting Bracket
Using the supplied screws, attach the amplifier to the bracket. Mount
the amplifier with the input connections closest to the tongue end of the
bracket.
NOTE: Turn all gain and EQ settings all of the way down. Adjust the
crossovers to Front HP 80 Hz and Rear LP 80 Hz.
Insert the tongue end of the bracket first to capture the bracket on the
plastic support panel below the shifter.
NOTE: The tongue has (2) tabs that go above the plastic panel and (1)
below.
There are (2) holes that the bracket needs to align with.
NOTE: On the driver’s side, the panel will need to be pulled up to get the
bracket inserted under its edge.
Step 6 - Wire Harness
Take the supplied wire harness and begin plugging into the amplifier. This
will consist of the inputs from the source unit, the speaker and subwoofer
outputs and the power connector that contains the power, ground and
remote.
NOTE: DO NOT connect the power and ground to the battery yet. This step
will get done at the end of the installation process.
https://appliancetechmanuals.com