5
Contents
Installation Tools
The following is a list of suggested tools needed for installation:
Installation Considerations
This section focuses on some considerations for installing your Yamaha
YXZ amplifier installation kit. This manual will illustrate the installation
process with a 2017 Yamaha YXZ1000R SS with a RFYXZ-K8 dash kit.
If you feel unsure about installing this system yourself, have it installed by
a qualified technician.
When drilling holes, make sure what is on the
other side. Be sure that any electrical, fuel lines
or any other important components are free
and clear from the area.
Before installation, disconnect the battery
negative (-) terminal to prevent damage to the
unit, fire and/or possible injury.
Before beginning any installation, follow these
simple rules:
• Be sure to carefully read and understand the instructions before
attempting to install this amplifier wiring kit.
• Consult your UTV’s service manual for model specific information.
Models may differ from year to year depending on factory options and
aftermarket accessories added.
• This kit are specifically designed to work with Rockford Fosgate’s PMX
series compact digital media receivers and speaker enclosures.
• With the addition of an amplifier or source unit, be sure that your
current charging system is in proper working order.
• Visit
rockfordfosgate.com
for more comprehensive product
information.
• Visit our
YouTube
channel for comprehensive installation videos.
• Small Flat Blade Screwdriver
• Ratchet
• 10mm Socket
• Allen Wrench
• Wire Cutters
• Amplifier Mounting Bracket
• Wire Harness
• Plastic Wire Tie Wraps
• Mounting Hardware
Installation
Applicable Models:
2016 & Up YXZ1000R/YXZ1000R SS w/ PMX-2
This amplifier installation kit is designed to work with Rockford Fosgate’s
TM400X4ad compact chassis amplifer, RFYXZ-PMXDK Dash Kit, RFYXZ-
FSE and RFYXZ-FSEU Front Speaker Enclosures, RFYXZ-FWE Subwoofer
Enclosure and RFYXZ-RSW16 Rear Speaker Wire Harness.
NOTE: Some additional interior pieces were removed to make photography
easier for documenting the installation process.
Step 1 - Remove Hood
Using a 4mm allen wrench, loosen the screws holding the hood in place
and remove the hood from the vehicle.
Step 2 - Remove Passenger Seat
Lift up on the front of the seat to expose the seat mounting bolts.
Installation Videos
Содержание Yamaha YXZ RFYXZ-K8
Страница 10: ...https appliancetechmanuals com...
Страница 11: ...https appliancetechmanuals com...