Short press the button to scan all the channels. The unit will keep on scanning every 5
seconds per channel until you press the SCAN button again to stop scan function.
PARENTAL CONTROL
You can lock any SiriusXM channels you do not want others to have access without your
permission. The default code is "5220". In case you forget your code please disconnect the
unit completely from the power.
l
GUIDE ON HOW TO ENTER THE CODE USING THE PRESET BUTTONS
When the first character is flashing, rotate the Volume knob to select number 5 and press it to
enter then the second character flash. The same operation to select the rest character
"2","2","0".When done, press Volume knob to confirm.
l
TO LOCK A CHANNEL
Select a channel that you wish to lock then long press SCAN button
―
"Lock Channel" will
show on the display. Enter the code then press Volume knob to confirm
―
"Channel Locked"
will show on the display
l
TO UNLOCK A CHANNEL
Select the channel that you wish to unlock then long press SCAN button
―
"Unlock Channel"
will show on the display. Enter the code then press Volume knob to confirm
―
"Channel
Unlocked" will show on the display
l
TO CHANGE THE CODE
Press and hold BAND Button
―
"Old Code" will show on the display. Enter the old code then
press Volume knob to confirm
―
"New Code" will show on the display. Enter your new code
then press Volume knob again to confirm
―
"SetCode ok" will show on the display.
l
LOCKED CHANNEL MANAGEMENT
When you want browse the locked channels, press and hold “Volume SEL” button and "1"
button simultaneously to enter the locked channel browsing mode. You can browse the entire
locked channel by rotating the Volume knob after entering the correct passcode. Select a
locked channel and press Volume knob if you want to unlock that locked channel, and if you
want to unlock all the locked channel, you just rotate the Volume knob until the “CLEAR ALL
LOCKED “advisory display, then press the Enter button to execute.
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights
reserved.”
USD/SD OPERATION
MODE (6)
l
MODE Selection
Short press MODE button to select USB/SD mode.
Note:
If there is no USB or SD Card reader device connected this mode will be skipped. If
there is a USB or SD Card reader device connected to USB1 port, the USB mode will be
displayed, and if there is a USB or SD Card reader device connected to USB2 port, the SD
mode will be displayed.
SEEK+ (2)/SEEK- (5)
Содержание RFX9900
Страница 4: ...WIRE DIAGRAM...