Rockford Fosgate RFX9900, Инструкция по эксплуатации

Страница: 10 / 17

key to select the channel showed on LCD and play it. If there is no key pressed in 5s, the LCD
will change back to display current playing channel information again.
l Rapid Channel Browsing
If category set is off, press and hold the buttons goes into rapid channel browsing mode, you
can browsing all channels in higher speed, if you release the touch key, the LCD will show the
information of the last browsed channel. , Press the enter key to select the channel showed on
LCD and play it. If there is no key pressed in 5s, the LCD will change back to display current
playing channel information again.
l Category Selection
If the category setting is on, long press and hold the buttons over 2S to select previous/next
category.
AS.PS (10)
l Direct Channel Tuning
Short press this button, “Select: - - -” will show on the display. Then, the first character will flash.
Rotate the Volume knob to select number 0-9 and press it to enter then the second character
flash. Use the same operation to select other character. After select the last number, press
Volume knob to enter and play.
l Channel Category Setting
Long press this button to enter category setting while “CAT” will show at the bottom left of the
screen, when press again, the category setting will be off, and “CAT” will disappear.
BAND/SUB (3)
l Bank of presets Selection
In SiriusXM mode, short press this button to change the bank of presets. The current bank of
presets will change in the following order: SXM1 – SXM2 – SXM3
l Reset
In SiriusXM mode, press and hold BAND and Enter button to reset the SiriusXM mode to the
factory default setting. When finished the reset operation finished, the locked channel will be
unlocked, the presets storing will be cleared, the parental control passcode will be restored
default passcode, etc.
PRESET 1-6 (11/12/13/14/15/16)
l Store Preset Channel
Long press a PRESET button, the current channel will be stored, and the corresponding preset
number will appear in the display. The PRESET buttons can be used to store 6 channels in
each bank of presets (SXM1, SXM2, and SXM3) for convenient access to your favorite
channels.
l Recall Preset Channel
To recall a preset channel, select a bank of channels (if needed).Short press a Preset button
and the unit will turn to the corresponding stored channel.
SCAN/MENU (9)
l
Channel scanning