10
0UZ[HSSH[PVU
Step 6 - Fairing Speaker Wiring
Take the factory speaker wires and plug them directly in to the new
High-Level Input Harness. These are labeled clutch and brake side.
Now you can plug the new Speaker Output Harness onto the
Rockford speaker terminals.
NOTE: The terminals utilize the 1/8” for negative (-) and the 1/4”
for positive (+) sizing for easy connections.
Step 7 - Remote Wire
After the speakers are wired, the orange wire will need to be
connected to the cigarette lighter. This is the remote power turn-on
for the amplifier.
Unplug the existing cigarette lighter wire and plug into the harness.
Then plug the orange wire onto the cigarette lighter terminal.
NOTE: When routing your wires, be sure to avoid sharp edges
which may cause damage to the wiring harnesses. Any extra wiring
should be zip tied up and out of the way of components.
Proceed to Step 8 on page 14 for continued installation
instructions.
All manuals and user guides at all-guides.com
