Rockford Fosgate CPU0204 Скачать руководство пользователя страница 2

CPU0204 

 

6. Know how to stop the unit and reduce pressure immediately. Be completely familiar with the controls. 
7. Stay alert - always be aware of where you are directing the high pressure spray 
8. Keep cleaning area clear of all people. 
9. Keep good footing and balance at all times - do not overreach or stand on an unstable support. 
10. The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces. 
11. Follow the maintenance instructions specified in the manual. 
12. To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands. 

 
GENERAL SAFETY PRECAUTIONS 

1. Intended for outdoor household use only. 
2. High-pressure hose can develop leaks from wear, abuse, kinking etc. Do not use a damaged hose. 
3. Do not use the pressure washer in areas near combustible materials, combustible fumes, or dust. 
4. Some chemicals or detergents may be harmful if inhaled or ingested causing severe injury. Use a respirator or 
mask whenever there is a chance that vapors may be inhaled. Read all instructions included with the mask so you are 
certain the mask will provide the necessary protection against inhaling harmful vapors. 
5. Before starting the pressure washer in cold weather, check all of the parts of the equipment and be sure that ice 
has not formed. Do not store the unit anywhere that the temperature will fall below 0°C (32°F). 
6. DO NOT MAKE ANY MODIFICATIONS TO ANY OF THE COMPONENTS! Units with broken or missing parts, or 
without the protective housing or covers should NEVER be operated 
7. Keep the high-pressure hose connected to the pressure washer and the spray gun while the system is pressurized. 
Disconnecting the hose while the unit is pressurized is dangerous, and may cause injury. 
8. Do not leave the pressure washer unattended while the power switch is ON. 
9. Keep water spray away from electrical wiring or fatal electric shock may result. 
 

SERVICING OF A DOUBLE-INSULATED APPLIANCE 

In a double-insulated product, two systems of insulation are provided instead of grounding. No means of grounding is 
provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing a 
double-insulated product requires extreme care and knowledge of the system, and should be doneonly by qualified 
service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace. A 
double-insulated product is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED". This symbol 

may also be marked on the product. 
 

USE OF EXTENSION CORDS 

Use of an extension cord with this product is NOT RECOMMENDED. If you must use an extension cord, use only 
extension cords that are intended for outdoor use. These cords are identified by a marking "ACCEPTABLE FOR USE 
WITH OUTDOOR APPLIANCES, STORE INDOORS WHILE NOT IN USE." Use only extension cords having an 
electrical rating not less than the rating of the product. Examine extension cord before use. Do not use damaged 
extension cords! Do not pull on cord to disconnect from receptacle, always disconnect by pulling on plug. Keep cord 
away from heat and sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the 
product from the extension cord. 
 

WARNING

 

- To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch the plug 

with wet hands. 
 

PROPER USE OF THE PRESSURE WASHER 

THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY! 
DO NOT USE HOT WATER IN THIS PRESSURE WASHER. 
1. Operate the pressure washer at no more than the fluid pressure rated for the pressure washer. Never run the 
pressure washer without a water supply. Running the unit without a water supply will cause irreparable damage to the 
unit. 
2. Make sure that the water supply you use for the pressure washer is not dirty, sandy, and does not hold any 
corrosive chemical products. Using a dirty water supply will compromise the long life of the pressure washer. 
3. 

CAUTION

 - The pressure washer can be used for a variety of applications including washing cars, boats, patios, 

decks, garages etc. where high pressure is necessary to remove dirt and debris. 
High-pressure water flow can damage the work surface if not used properly! See the section titled "Operating 
Instructions" for more details. Always test the spray in an open area first. 
4. 

NEVER

 move the unit by pulling on the high pressure hose. Use the handle provided on the top of the unit. 

Содержание CPU0204











Отзывы: