Pg 24
Pg 25
INSTALLING & OPERATING APPLE iOS
OR ANDROID APP FOR R 60V
1. Go to Google Play (Android) or App store (iPhone) and install the
App called ‘Rocket R 60V’
2. On your phone, go to settings and then Wi-Fi .Search for the
machines Wi-Fi network called RocketEspresso and connect.
Password for this network is RocketR60V.
3. Open the App- Rocket R 60V - and click connect.
4. Check on the lower status bar the machine is connected to the
network RocketEspresso.
5. Set as desired. Refer to the User Manual for guidance to set the
various parameters, pages 17 - 23.
SETTINGS
•
Machine State - indicates if the machine is on or in
standby mode.
•
Language - select desired language.
•
Service Boiler - on /off.
•
Water Supply – select from the option of mains water or reservoir.
•
Temperature display – select from °C or °F.
•
Brew Pressure - indicates which profile is currently set. If you wish
to change the profile press one of the alternative choices.
TO SET BREW PRESSURE AND INDIVUAL PRESSURE PROFILES
Select Profile (A, B or C) every profile has five steps with the
possibility to set five different time (seconds) and bar (pressure
combinations).
Start with the first step – tap it set the time and pressure. Tap ok to
confirm and go to next step.
You do not need to choose all the steps for all the profiles. They can
remain as zero values. Check you have the desired Total extraction
time. Refer to the manual for further information and guidance.
BOILER TEMPERATURE
You can adjust the coffee boiler temperature, which is set ex-factory
to 105°C and service boiler (steam and hot water) which is set ex-
factory to 123°C
AUTOMATIC ON/OFF
•
You can set the time the machine automatically starts heating up
in the morning and stops heating at night (going to Stand-By or
Shutdown).
•
To use this function the machine must remain on.
•
As the machine is ON the first step is to set the SHUTDOWN or
STANDBY time.
•
This will then place the machine in standby mode to come on at
the programmed time.
CLOCK
Is set automatically by the network.
STANDBY /SHUTDOWN
•
Step 1. Set the shutdown or standby time you would like the
machine to turn off and then press ok or save to confirm.
•
Step 2. Set the start time you would like the machine to turn on
and press ok or save to confirm.
•
When you have finished programming your machine, disconnect
from machines network.
* In some countries it is a requirement that the machine is turned off
when unattended.
