Rock The Bike Fender Blender Pro High Performance, Руководство пользователя

Страница: 5 / 9

1. Open the seatpost lever, and Insert the seatpost (a).
2. Align the seatpost groove with the machine screw on the back
of the seat tube (b).
3. Tighten the screw as much as possible with your fingers,
making sure that the screw is in the groove.
4. Finish tightening the screw with the 5mm hex key (c).
1. Using the 6mm hex key
loosen the two side bolts of
the stem and turn it so it’s
aimed forward.
see included coaching card for seat HEIGHT tips
9
HANDLEBARS
5. Check chain tension by rotating the pedals backwards a few
turns. If there is a tight spot in the rotation, loosen the skewer and
move the wheel backwards so the chain is taught as possible
without causing a tight spot in the rotation. If the chain is loose
and sagging, loosen the skewer and pull the wheel forward.
SEATPOST
For more help and details about wheel install, watch
videos at: rockthebike.com/troubleshooting-tips
assembly
(
a
) (
b
) (
c
)
8
3. Loop the chain over the chainring (a), and over the teeth of
the wheel cog (b), then insert the wheel through the front legs.
assembly
To check wheel alignment, look
past the wheel to see equal
distance on both sides.
4. Lift the wheel and slide the axle into the wheel mounting
slots. Pull the wheel toward you, and while holding the chain
taught, adjust the wheel so it is straight and aligned with the
frame. Then have a friend tighten the axle skewer with a
5mm hex key (c).
(
c
)