manualshive.com logo in svg

Roche CoaguCheck Pro II, Руководство оператора

Поделиться
Скачать
Roche CoaguCheck Pro II Скачать руководство пользователя страница 114

114

Displaying the test result as QR 

code

1

Touch 

 to display the result as QR code.

2

Touch 

 to return to the standard result display.

The size of the QR code displayed on the screen varies 

according to the amount of data encoded.

Finishing the test

After the test result is displayed, touch 

 . You will be 

prompted to remove the strip.

1

Remove the test strip from the meter.

2

Power the meter off.

3

Clean the meter if necessary (see Chapter 8, 

Main-

tenance and Care

). 

 The QR code icon only appears if the QR code dis-

play function is activated (see page 64 and following). 

Otherwise it is not displayed.

Test

09:15 am

05/29/2015

P-ID:

PID01

Code:

184

2.5

INR

Smith, Henry

Op:

Operator 1

Par:

PT

Doctor Notifi ed

Sick

NEW MEDICATION

21

%Q

05/29/2015 11:31 am

Test

09:15 am

05/29/2015

Remove

09:15 am

05/29/2015

Protection against infection: 

When collecting samples always observe the general 

precautions and guidelines relating to blood sampling 

(see page 17).
Dispose of all test strips used for patient testing in 

accordance with the disposal policy of your laboratory or 

practice (see page 17). 

Содержание CoaguCheck Pro II





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды