pag. 10
1.1 Technical specifications
Parameter
Value
Minimum - Maximum draught
11-13 Pa
Fuel consumption
2,7 kg/h
Smoke mass flow rate
12 g/s
Performance
82 %
Nominal output
9 kW
Maximum power
15 kW
Average CO concentration at 13% of O2
0,10%
Particle concentration
28 mg/Nm
3
Payload (trial)
2,1 kg
Reload interval period (trial)
47 min
Medium draft (trial)
12 Pa
Net weight
148 kg
Maximum authorized load (fuel)
5 kg
Reload height
200 mm
Logs length
300 mm
Minimum flue height
4000 mm
Flue duct
176 x 166 mm
Ø Air inlet
100 mm
Front safety distance
1000 mm
Side safety distance
300 mm
Back safety distance
200 mm
Primary register (trial)
15% open
Secondary register (trial)
60% open
Average temperature of smoke
159º C
Type of combustion
INTERMITTENT
Flue liner
NOT SHARED
Fuel
NATURAL WOOD
Humidity fuel logs
12-20% - two years under cover
Certification year
2015
Certificate No.:
CEE-0151/15-1
1.2 Breakdown of delivery components
(Make sure you have all the components described below in relation to the picture on section II of the ANNEXED
document)
1. Fireplace’s body
2. Flue liner connector
3. Back trim of the ceiling plate
4. Front trim of the ceiling plate
5. The body of the telescopic ceiling plate
6. Body of the ceiling plate
7. Tool for handling registers and opening door
8. Upper baffle to limit the draught
9. Aluminium ring to connect
10. Flat string for the ceiling plate
11. Heat-resistant glove
12. Cleaning cloth
13. Envelope with 3 documents: specifications, installation and operation manual, and Guarantee sheet.
14. Metal clamp
15. Bag with metallic anchors
16. Heat-resistant spray paint for touch-ups
17. Bag with screws and anchors
18. Fixative of the aluminium ring
19. Exterior air inlet cover
1. SPECIFICATIONS
