18
When the spray strength is weak, clean the strainer.
(1) Close the water shutoff valve's Open/Close handle.
CAUTION:
Do not remove the strainer with the water shutoff
valve opened.
* Doing so may cause water leakage from the strainer.
(2) Press the flush button on the remote control unit.
(3) Remove the side panel on the left side of the toilet,
then place a wash basin, etc. underneath and
remove the strainer for the toilet.
(4) Place the wash basin, etc. underneath and remove
the shower toilet strainer on the bottom right of the
shower toilet body.
(5) Clean the strainers.
(6) Install the strainers again in their original place.
CAUTION:
When installing the strainers, tighten them
completely so there is no gap.
* If they are not tightened fully, water could leak from the
strainers.
(7) Open the water shutoff valve.
* If water doesn't come out even after the strainers
have been cleaned, check the water supply
pressure.
Water Shutoff Valve
Open/Close
Handle
Close
Toilet Strainer
Bottom
Right Side of
Shower
Toilet Body
Shower Toilet Strainer
