Roca GEORGIA, Руководство по установке

Страница: 8 / 12

Important! Before directly fitting the swivel piece (C) to the threa-
ded (M10) rod, fit the upper end of the unit (figure 2), adjusting the
threaded rod (G) so that it is tight against the inside edge of the tub,
together with the upper support and its support plate (F). This can
be achieved easily by turning the rod (G). Fasten the nuts (H) and
the nuts (E) after changing the flat washers for the serrated washers
supplied with the nuts and bolts. Ensure at all times that you do not
raise the tub when you fasten the nuts. The black plugs must be
parallel to the lower curve of the panel, to support the panel, turn
the support unit towards it (see photos VI and VIb).
The support shall be seated approximately 45˚ in relation to the
bathtub leg (see photo VII).
Vll
Approx. 45˚
Vll
END SUPPORTS
9
Changed serrated
washers (nuts and bolts bag)
Vlb
Vlb