Roca EURET A35945E000, Руководство по установке, Страница: 7 / 20

7
6 Installation procedure
• Apply silicone continuously around the top section of urinal.
• Ensure no water leakage around the AC power socket to prevent possible installa
tion failure.
Make sure the connection it's correct and open the water to test the function.
After function test is completed, follow the bottom diagram to apply silicone sealer around the urinal.
Apply magnet
ENTER INTO DISTANCE
ADJUSTMENT MODE
Flushing mode selection
For auto-flushing mode, you may select water-saving mode or intensive clean mode based on your preference.
ENTER INTO
FLUSHING
MODE
LED will flash for 5 times and
IR will automatically adjust
distance
WATER SAVING
MODE
LED will flash for
one time.
INTENSIVE
CLEAN MODE
LED will flash for
two times.
Approach a magnet to IR
window for >10sec
WATER SAVING MODE INTENSIVE CLEAN
Pre-flush
When the interval between two users is more than
30min
Always
Main flush
Half volume when the interval between two users is
5min.
Always
Deodorizer function No Flush if more than 3 users during 2 min.
Finish setting
Wait 10sec
Apply magnet
NOTE: For auto adjustment, make sure no object is located in the detection range during setting timing. If you would like to manually
adjust the distance please put an object (such us white paper) in the desired distance during the setting time.
Approach a magnet to IR
window between 5-10sec
Settings
7
Distance adjustment
Follow below steps to limit detection distance in reduced space enviroment.