Robustel GoRugged M1000 UP User Guide
RT_UG_M1000 UP_v.1.1.1
07.10.2015
13 / 39
2.
Don’t bend or scratch your SIM card. Keep the card away from electricity and magnetism.
3.
Make sure to disconnect the power source from your modem before inserting and removing your SIM card.
2.5
Connect the External Antenna (SMA Type)
Connect this to an external antenna with SMA male connector. Make sure the antenna is within correct frequency
range as your GSM/GPRS/UMTS/HSPA
operator with impedance of 50ohm, and connector is screwed
tightly.
2.6
Connect the Modem to External Device
User can use the USB cable to connect the modem’s Mini USB Connector to external slave devices / controller /
computer.
Note
:
User needs to install relevant USB driver to PC, which you can find out in the CD.
2.7
Mount the Modem
Two ways of mounting the modem
1.
Use 3 pcs of M3 screw to mount the Modem on the Wall mounting Kit.
And then use 2 pcs of M3 screw to mount the Wall mounting Kit on the wall.
Screw tightly
