Robur Supercromo Скачать руководство пользователя страница 5

Warnings 

Installation, use and maintenance manual – Supercromo 

5

III

If you smell gas:

 

„

Do not use electrical devices such as telephones, 

multimeters or other equipment that may cause 

sparks next to the appliance.

 

„

Shut off the gas supply by turning the valve off.

 

„

Open immediately doors and windows to create a 

cross-current of air to ventilate the room.

 

„

Switch off the power supply via the external dis-

connect switch in the power supply electrical pan-

el.

 

„

Use a telephone away from the appliance to ask for 

intervention from qualified personnel.

Poisoning

 

„

Ensure the flue gas ducts are tight and compliant 

with the regulations in force.

 

„

Upon completing any procedure, ensure the tight-

ness of the components.

Moving parts

The appliance contains moving parts.

 

„

Do not remove guards during operation, and in 

any case prior to disconnecting the power supply.

Burn hazard

The appliance contains very hot parts.

 

„

Do not open the appliance and do not touch inter-

nal components before the appliance has cooled 

down.

 

„

Do not touch the flue gas exhaust before it has 

cooled down.

Electrocution hazard

 

„

Disconnect the electrical power supply before any 

operation on appliance components.

 

„

For electrical connections exclusively use compli-

ant components and according to the specifica-

tions provided by the manufacturer.

 

„

Ensure the appliance cannot be accidentally 

switched back on.

Earthing

Electrical safety depends on effective earthing sys-

tem, correctly connected to the appliance and in-

stalled according to the regulations in force.

Air flow

Do not obstruct the fan intake or the warm air 

outlet.

Distance from combustible or flammable mate-

rials

 

„

Do not deposit flammable materials (paper, dilu-

ents, paints, etc.) near the appliance.

 

„

Comply with current regulations.

Aggressive substances in the air

The air of the installation site must be free from ag-

gressive substances.

Switching the appliance off

Disconnecting the power supply while the appli-

ance is running may cause permanent damage to 

internal components.

 

„

Except in the event of danger, do not disconnect 

the power supply to switch off the appliance, but 

always and exclusively act through the provided 

control device.

In the event of failure

Operations on internal components and repairs 

may exclusively be carried out by a TAC, using only 

original spare parts.

 

„

In the event of failure of the appliance and/or 

breakage of any component, do not attempt to 

repair and/or restore and immediately contact the 

TAC.

Routine maintenance

Proper maintenance assures the efficiency and 

good operation of the appliance over time.

 

„

Maintenance must be performed according to the 

manufacturer's instructions (see Chapter 7 

p.  23) 

and in compliance with current regulations.

 

„

Appliance maintenance and repairs may only be 

entrusted to firms legally authorised to work on 

gas appliances and systems.

 

„

Enter into a maintenance contract with an author-

ised specialised firm for routine maintenance and 

for servicing in case of need.

 

„

Use only original parts.

Keep the Manual

This Installation, use and maintenance manual 

must always accompany the appliance and must 

be handed to the new owner or installer in the 

event of sale or removal.

III.2 

   COMPLIANCE

 

EU directives and standards

The Supercromo series gas-fired convectors are certified 

in accordance with European regulation GAR 426/2016/

EU and meet the essential requirements of the following 

Directives:

 

2016/426/EU "Gas Appliances Regulation" as amend-

ed and added.

 

2014/30/EC "Electromagnetic Compatibility Directive" 

as amended and added.

 

2014/35/EC "Low Voltage Directive" as amended and 

added.

Содержание Supercromo





























Отзывы: