Installation and operation manual – remote control
13
Figure 12.2
Non resettable fault
13 TEMPERATURE VALUES DISPLAY
By pressing the
key several times, the remote control is able
to display the values of the items shown in Table 13.1
Table 13.1
Identification icon of the selected item
Selected item
Identification icon
set room temperature
DHW probe temperature*
delivery probe temperature
outdoor temperature*
* Not applicable to this model
▶
Set room temperature display: corresponds to the set tem-
perature for the active temperature level (day/night/manu-
al) (Figure 13.1
p. 13).
Figure 13.1
Set room temperature display
▶
Delivery probe temperature display: corresponds to the
temperature read by the delivery water probe in the boiler
(Figure 13.2
p. 13).
Figure 13.2
Delivery water probe temperature display
14 ROOM ANTIFREEZE FUNCTION
The remote control is equipped with the room antifreeze func-
tion (which can be excluded if necessary) which, regardless of
the selected operating mode, controls the boiler activation
when the temperature detected by the room probe is lower
than the value set in parameter P01, thus providing protection
of the system from the danger of freezing.
