Assembly and installation
Installation manual – System controller
17
2
2.4
QAA75�611 ADVANCED ROOM UNIT
Location
Figure 2�9
Description of installation position of room unit
The room unit should be installed in a reference room, usually
the living room, bearing the following in mind:
▶
the room unit must be installed about 1.5 m off the ground,
in an area which allows the sensor to read the room temper-
ature as accurately as possible, it should therefore be out of
the way of draughts, sunlight and other sources of heat;
▶
if wall mounted, leave enough space above the unit for it to
be installed and removed when necessary.
Once removed from its base, the room unit is no longer
powered and is thus inactive.
Installation
Figure 2�10
Description of installation procedure for room unit QAA75.611
Do not install the room unit in rooms exposed to water
or damp.
For further details on the operation, installation and use
of the room unit, refer to section 5
p. 31, in particular
par. 5.1.5
p. 33 and 5.1.7 p. 34.
