manualshive.com logo in svg

ROBOTIQ Gripper, Инструкция по эксплуатации

Поделиться
Скачать
ROBOTIQ Gripper Скачать руководство пользователя страница 58

Robotiq 3-Finger Adaptive Robot Gripper

Instruction Manual

Robotiq inc. © 2008 - 2014

58

4.7 MODBUS RTU communication protocol

The Robotiq 

 can be controlled via RS485 or RS232 by using the Modbus RTU protocol. This

3-Finger Gripper

section is intended to provide guidelines for setting up a Modbus scanner that will adequately communicate with the
Gripper. 

For a general introduction to Modbus RTU and for details regarding the CRC algorithm, the reader is invited to read
the Modbus over serial line specification and implementation guide available at: 

http://www.modbus.org/docs/Modbu

. 

s_over_serial_line_V1.pdf

For debugging purposes, the reader is invited to download one of many free Modbus scanners, such as the CAS

 from 

, which is available at: 

Modbus Scanner

Chipkin Automation Systems

http://www.chipkin.com/cas-modbus-scan

.

ner

Note

The Adaptive Gripper register values are updated at a 100Hz frequency. It is therefore
recommended to send commands with a minimum interval delay of 10ms. Note that the updated
frequency may drop under some conditions where the response time would be longer.

Содержание Gripper






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды