Robot Coupe R 502 V.V. e, Руководство пользователя, Страница: 8 / 18

7
04/09/2020
INTRODUCTION TO YOUR NEW
BOWL CUTTER/VEGETABLE
PREPARATION ATTACHMENT
R 502
g
• R 502 V.V.
g
•
R 752 • R 752 V.V.
The food processor is perfectly geared to
professional needs. It can perform any number of
tasks, which you will gradually discover as you use it.
The food processor consists of a bowl cutter
and vegetable preparation attachment. In cutter
mode, this machine can be used to process
meat, vegetables, fine stuffing, mousse, grinding,
kneading, ... in less than 5 minutes for even the
longest tasks.
In the vegetable preparation version, the device has
a wide range of discs for slicing, grating, julienne,
dicing and French fries.
Its numerous functions will open the door to a whole
new culinary world.
Thanks to its simple design, all components
requiring frequent handling for maintenance or
cleaning can be fitted and removed in a trice.
To make things easier for you, this manual gives a
breakdown of all the various fitting operations.
We place special emphasis on those actions which
cause the machine to stop.
This manual contains important information
designed to help the user get the most out of his or
her bowl cutter/vegetable preparation device.
We therefore recommend that you read it
carefully before using your machine.
We have also included a few examples to help you
get the feel of your new machine and appreciate its
numerous advantages.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNNECTIONS
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
identification plate.
If the blade turns in a clockwise direction, swap
over two wires:
GREEN YELLOW is the earth,
DO NOT DISCONNECT
Swap either : the
➊
and the
➋
the
➊
and the
➌
the
➋
and the
➌
R 502 V.V. • R 752 V.V. Single phase
The models are available with a single phase
motor: + variable speed: 230 V / 50 - 60 Hz /1
The standardized plug must be calibrated to a
minimum of 16 amps and preferably 20 amps, if
the appliance is used intensively.
• ENERGY SAVING MODE FOR R 502 - R 752
After the food processor is plugged in, it needs to be
switched on by pressing the “on” button I.
If the processor is not used for 5 minutes, it will go
into energy saving mode.
The “on” button needs to be pressed again to switch
on the power supply.
• CONTROL PANEL
Red switch = Off switch
Green switch I = Start speed 1
Black switch
= Pulse control
R 502 • R 752:
Green switch II = Start speed 2
R 502 V.V. • R 752 V.V.: Speed variation for
cutter bowl from 300 to 3,500 rpm. For vegetable
preparation from 300 to 1,000 rpm.
R 502 • R 752 Three phase
ROBOT-COUPE appliances are fitted with the
following types of motor:
230 x 400 V switchable / 50 Hz / 3
400 V / 50 Hz / 3
220 V / 60 Hz / 3
380 V / 60 Hz / 3
This machine is supplied with a cable to which you
simply attach the appropriate electrical plug or iso-
lator for your system. The cable has four wires, one
earth wire, plus three phases wires.
If you have a 4-pin plug:
1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.
If you have more than 4 pins in the plug,
please note
the ROBOT-COUPE does not require a neutral wire.
Switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise
direction.
On the lid a arrow marks the blade rotation directions.
If the blade turns in a clockwise direction, swap
over two wires.
This appliance must be plugged into an
earthed socket (risk of electrocution).
W A R N I N G