Robot Coupe MicroMix, Руководство пользователя, Страница: 8 / 13

16
ROBOT-COUPE power mixers are equipped with a
safety system comprising of a:
- failsafe switch to avoid accidentally turning the
appliance on.
• safety control button
This safety mechanism prevents any unintentional
starting of the power mixer. In fact, it is necessary to
press down button to start the power mixer. In order
to start the machine, read the paragraph entitled
OPERATING THE APPLIANCE (page 14).
I m P O r T a N T
Check that your detergent is suitable for
cleaning plastic parts. some washing agents
are too alkaline (e.g. high levels of caustic
soda or ammonia) and totally incompatible
with certain types of plastic, causing them to
deteriorate rapidly.
W a r N I N G
From time to time, check:
- The state of the button’ watertight
membranes. Even the tiniest cracks will
allow liquid to seep in.
- The state of the blender housing. This,
should not show any signs of cracking
or any abnormal openings which could
allow access to the live components.
saFETy
W a r N I N G
The blades are extremely sharp. Handle
with care.
r E m I N D E r
Never operate your appliance if the
watertight membrane or blender body is
damaged in any way.
Never insert an object into the preparation
Never switch the appliance on unless it has
been placed in the preparation bowl.
always make sure the appliance is
unplugged before detaching the foot.
We recommend that you tilt the power mixer
at a slight angle to prevent the bell from
touching the bottom of the container.
PrOBLEms
At first, try to identify precisely what has caused the
power mixer to stop.
• If it is due to a powercut if the appliance has
been unplugged.
- Release the control button (BC).
- Check the power supply.
W a r N I N G
always handle the blade with caution, as it
is extremely sharp.
- After unplugging the appliance – essential –,
making sure that no water finds its way into the foot.
• Complete cleaning procedure
- Unplug the power mixer.
- Rinse the foot under (preferably hot) running water.
Do not immerse.
- Detach the tool using the recommended procedure
(page 15).
- Do not use too strong a detergent when cleaning
the parts.
- Ensure that all the different parts are thoroughly
dried before reassembly.
• BLaDE aND EmuLsIFyING TOOL
The blade and emulsifying tool can be detached from
the foot for in-depth cleaning.
After cleaning the blade and the emulsifying tool,
always make sure you wipe them dry to prevent any
oxidation.
maINTENaNCE
• BLaDE
The performance of the cut essentially depends on
the state of your blades and their wear. The blades
are subject to wear and as such need to be replaced
from time to time to ensure the consistent quality of
the end product.
• EmuLsIFyING TOOL
The end result depends essentially on the state of the
emulsifying tool and its degree of wear. So make sure
you replace it from time to time, to ensure a flawless
end product every time.