Robot Coupe MicroMix, Руководство пользователя, Страница: 5 / 13

13
WarNING: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the appliance,
please read these instructions carefully and follow them strictly. reading the operating instructions will help you get to know your appliance and enable
you to use the equipment correctly. Please read these instructions in their entirety and make sure that anyone else who may use the appliance also reads
them beforehand. Our equipment is designed for professional use and must not be used by children under any circumstances.
ImPOrTaNT WarNING
usE
• Never try to override the safety systems.
• Never insert an object into the preparation.
• Never switch the appliance on unless it has been
placed in the preparation bowl.
• Before dismantling the foot, bell or whisk always
check that the power mixer is unplugged.
• We recommend that you tilt the appliance at
a slight angle to prevent the bell from touching the
bottom of the container.
W a r N I N G
Procedure to follow should the stick blender
become accidentally immersed during use.
1) Do not touch the blender, the container, or
the worktop.
2) Unplug the blender from the wall socket.
3) Lift the blender out of the preparation.
4) Tilt the blender to allow as much of the
liquid to drain out as possible.
5) Do not switch the blender back on, as
there is still a risk of electric shock.
6) The blender must be sent to a Robot-Coupe
approved after-sales service so that the
electric
CLEaNING
• As a precaution, always unplug your appliance
before cleaning it.
• Always clean the appliance and its attachments
at the end of each cycle.
• Never immerse the motor unit in water.
• For parts made from aluminum, use cleaning
fluids intended for aluminum.
• For plastic parts, do not use detergents that are
too alkaline (e.g., containing too much caustic
soda or ammonia).
• Robot-Coupe can in no way be held responsible
for the user’s failure to follow the basic rules of
cleaning and hygiene.
maINTENaNCE
• Before opening the motor housing, it is
absolutely vital to unplug the appliance.
• Check the seals and washers regularly and ensure
that the safety devices are in good working order.
• It is particularly important to maintain and check
the attachments since certain ingredients contain
corrosive agents, e.g. citric acid.
• Never operate the appliance if the power cord or
plug has been damaged or if the appliance fails to
work properly or has been damaged in any way.
• Do not hesitate to contact your local Maintenance
Service if something appears to be wrong.
uNPaCKING
• WARNING - some of the tools are very sharp
e.g. blades, etc..
INsTaLLaTION
• We recommend that you install your appliance
on its wall frame.
CONNECTION
• Always check that your mains supply
corresponds to that indicated on the identification
plate on the motor unit and that it can withstand
the amperage.
• Never plug your appliance into the mains supply
before placing it inside the preparation bowl.
HaNDLING
• Always take care when handling the blades, as
they are extremely sharp.
assEmBLy PrOCEDurEs
• Follow the various assembly procedures
carefully (see page 14) and make sure that all the
attachments are correctly positioned.
a T T E N T I O N
CONsErVEr CEs INsTruCTIONs