Robot Coupe Blixer 23 a, Руководство пользователя

Страница: 19 / 75

40
10)
Replace the
bowl seal,
placing it on the
chamfer.
11)
Place 1 mm
thick washer
12)
Push down
blade assy, stop
when hits motor
shaft
13) Remove
1 mm thick
washer
14) Put back the
bowl, pouring
lip on left hand
side
15) It’s done !
7) The stainless-
steel part and de-
flector have now
been removed.
8) Replace the
two lip seals.
9) 5 to 3 in
inverse order
5 4 3
Blixer
®
45 / Blixer
®
60
R 45 / R 60
Only
• BOWL SEAL
The bowl seal, located bet-
ween the bowl and the bu-
shing, ensures that the bowl
remains watertight.
The bowl seal must be regu-
larly oiled, using food-grade
silicone lubricant.
This part must be replaced each year, as the water-
tightness of the bowl depends on its degree of wear
and tear.
In order to make it easier for you to clean your
appliance, the bowl watertightness system is located
on the underside of the bowl.
As a result, a small area here may fill up with
foodstuff, though it will empty itself when the bowl is
released.
• LID SEAL
he lid is designed to be completely watertight within
the limits set out on page 37 (see examples of use).
In order to ensure that it remains that way, you may
have to change the seal occasionally, depending on
how regularly you use your machine.
If you do not use your machine regularly, we
recommend that you leave the lid open when it is
not in use jobs to preserve all these features.
• BLIXER SCRAPER ARM
The scraper arm is fitted with rubber wipers. These
are wearing parts, which therefore need to be
replaced from time to time in order to maintain
optimum efficiency.
The wipers are easy both to remove and to fit.
Bowl seal
In order to ensure that the motor remains comple-
tely watertight, we recommend checking the lip
seals once a quarter for signs of wear and tear,
and replacing them every 6 months.
When the seals are worn, liquid may first run into
the bearings, then reach the motor. If this happens,
the seals, the bearings and even the motor may
have to be replaced.
- Replacing the lip seals
1) Tools needed
See kit supplied
on delivery.
2) Remove the
bowl
3) Remove the
bowl base seal.
4) Unscrew the
3 bolts
5) Remove bolts
and washers
6) Put back the
bowl and pull up
1
2
1
2
Small
8 mm
Not indispensable
Blixer
®
45 / Blixer
®
60
R 45 / R 60
Only
VCM - BLIXER An:VCM - BLIXER 10/01/13 10:26 Page 40