11
•
Firmware Update
•
Volume Adjustment
•
Language Selection
•
Do Not Disturb Mode
•
Voice Assistant Support
Functions and details of the app may vary slightly due
to the continuous app development and updates.
Note:
More Features
C1
Main Brush
* Clean every 2 weeks and replace every 6-12 months.
C1-1—
Main Brush Cover
C1-2—Latches
C1-3—
Main Brush
C1-4—
Main Brush Caps
C1-5—
Main Brush Bearing
C1-6—
Turn over the robot and press the
latches to remove the main brush cover.
Rotate the main brush caps in the
indicated unlock direction to remove
the caps.
C1-8—
After removing the tangled hair or
dirt at both ends of the main brush,
reinstall it, press on the main brush
cover to lock it in place.
C1-9—
Notes:
•
Main brush should be wiped down with wet cloth and left
to dry away from direct sunlight.
•
Do not use corrosive cleaning fluids or disinfectants to
clean the main brush.
C2
Side Brush
1. Unscrew the side brush screw.
2. Remove and clean the side brush.
Reinstall the brush and tighten the screw.
* Clean monthly and replace every 3-6 months.
Pull out the main brush and remove
the main brush bearing.
C1-7—
Routine
Maintenance
C
Clean the main wheels with a soft, dry cloth.
C4
Main Wheels
* Clean monthly.
C3
Omni-Directional Wheel
Use a tool, such as a small
screwdriver, to pry out the axle and
take out the wheel.
C3-1—
* Clean as required.
Rinse the wheel and the axle with
water to remove any hair and dirt.
Dry and reattach the wheel, pressing
it firmly in place.
C3-2—
The omni-directional wheel bracket cannot be removed.
Note:
C5
Dustbin
Open the dustbin cover and remove
the filter, then empty the dustbin.
C5-2—
Open the top cover of the robot and
take out the dustbin.
C5-1—
* Clean as required.
Fill the dustbin with clean water
and close the cover. Gently shake
the dustbin, and then pour out the
dirty water.
C5-3—
To prevent blockage, only use clean water without any
cleaning liquid.
Note:
Leave the dustbin and the washable
filter to dry.
C5-4—
Purchase an additional filter and alternate if necessary.
Rinse the filter repeatedly and tap it
to remove as much dirt as possible.
Allow 24 hours for the filter to dry
thoroughly and reinstall it.
Do not touch the surface of the filter with your hands,
brush, or hard objects to avoid potential damage.
Note:
Note:
C6-3—
C6-2—
Open the water tank and fill it with
clean water
.
Close the water tank and shake it
gently.
Pour out the remaining water as
shown.
C7-1—
* Clean as required.
C7-2—
C7-3—
Open the filter cover and remove the
filter.
C6
Washable Filter
C7
Water Tank
* Clean every 2 weeks and replace every 6-12 months.
C6-1—
