Roborock S6 Pure, Руководство пользователя

Страница: 26 / 37

22
Routine maintenance
Wheel
Axle
Bracket
Cliff sensor
Omnidirectional wheel
Charging contact
Side brush
Wall sensor
Note:
The omnidirectional wheel bracket cannot be removed.
System Reset
If the robot does not respond when you press a button or
the robot cannot be shut down, press the Reset button .
The robot will then restart.
Note:
After a system reset, cleaning schedules, WiFi and other settings will be restored to
factory settings.
Restore factory settings
If the robot is not functioning after a system reset, turn it on,
then press the button, and then press and hold the Reset
button until you hear the "Start restoring initial version"
voice alert. The robot will then be restored to factory
settings.
Robot sensors
*Clean monthly
Use a soft dry cloth to wipe and clean all sensors, including:
1. Four cliff sensors at the bottom of the robot.
2. The wall sensor on the right of the robot.
3. The charging contact on the bottom of the robot.
Firmware update
Update the robot using the app. Place the robot on the
charging dock and ensure that the battery level is higher
than 20% before updating. The power indicator will flash
white quickly during a firmware update.