Roborock S6 MaxV, Руководство пользователя

Страница: 22 / 201

21
Installation
Using the Robot
Remove the water tank
Reinstall the water tank
Fill the water tank
Install the mop cloth
①
③
②
④
Press the water tank latch and slide the tank backwards.
Slide the water tank into the robot until you hear it lock with a click.
Open the water tank, fill it with water, and close it tightly.
Dampen the mop cloth and wring it until it stops dripping. Insert it into
the bottom along the slot of the water tank and stick it firmly in place.
Note:
Use virtual barriers and no-mop zones to prevent the robot mopping carpeted floors.
Note:
To prevent corrosion or damage, do not use cleaning fluid or disinfectant in the water tank.
Do not use hot water as this may cause the tank to deform.
Mopping the floor 6.
Note:
To prevent excessive dirt buildup on the mop, floors should be vacuumed at least three times before
the first mopping session.
・
・