ROBORISEN PINGPONG G Series, Руководство пользователя

Страница: 10 / 37

•
Be sure to turn off the power when PingPong Robot is not used.
•
As battery power supply may be insufficient depending on the robot
model, fully charge it before use.
•
As for the battery of cube, it can be used continuously for about an hour
for a wheel
- driven robot, and about 20 minutes for a joint - driven robot
(or operation).
•
In the event of the sudden voltage drop due to the continuous
operation or battery discharge due to long use, LED indicator flickers in
red 5 times and the power of Cube is turned off.
•
After 5 minutes from disconnecting power and wireless connection, the
system becomes the dormant state (flickering in white), and the power
turns off automatically after 5 minutes.
You can charge PingPong Robot
using the Magnet
Charging Cable
built in the box . When charging USB,
use a rated 5V/3 A dedicated
charger . When using a USB port of
laptop or PC, there is a concern of
terminal damage .
Several Cubes can be charged at a
time connecting together .
It takes about an hour from 1 to 6
Cubes to the full charge, and takes
more time for
7 Cubes for more .
When charging starts, LED next to
the button lights in red, and the
light turns off when fully charged.
Tap!
Flash -
1. Search the “PingPong Robot” application with a Smartphone
and install it.
PingPong Robot
PingPong Robot
RoboRisen
Install
2. Turn on Bluetooth and GPS in the Smartphone setting
window, and allow use .
Matters Related to Charging
Connection to Smartphone
PINGPONG
G SERIES
G